SPECIFICATIONS: CAPACITY:
X-AXIS TRAVEL -------------------------- 33.5 in
Y-AXIS TRAVEL -------------------------- 23.6 in
Z-AXIS TRAVEL -------------------------- 23.6 in
TABLE SIZE ----------------------------- 41.3 in X 23.6 in
T-SLOT (# X W) ------------------------- 5 X 0.7 in
TABLE TOP TO FLOOR --------------------- 35.4 in
TABLE LOAD ----------------------------- 1,870 LBS.

SPINDLE:
SPINDLE TAPER -------------------------- CAT 40
SPINDLE BEARING OD/ID ------------------ 4.33 in /2.76 in
SPINDLE NOSE TO TABLE DISTANCE --------- 4.9 in - 28.5 in
SPINDLE CENTER TO COLUMN DISTANCE ------ 25.19 in
SPINDLE MOTOR TYPE --------------------- FANUC DELTA 8 AC
MOTOR OUTPUT (30 MIN) ------------------ 15 HP
MOTOR OUTPUT (PEAK) -------------------- 20 HP
MOTOR BASE SPEED ----------------------- 1,500 RPM
SPINDLE DRIVE SYSTEM ------------------- GEAR TRANSMISSION
SPINDLE SPEED RANGE
LOW ----------------------------------- 65 - 1,500 RPM
HIGH ---------------------------------- 1,500 - 8,000 RPM
SPINDLE FULL OUTPUT SPEED -------------- 1,500 RPM
SPINDLE TORQUE (30 MIN) ---------------- 204 FT-LBS.
SPINDLE TORQUE (PEAK) ------------------ 277 FT-LBS.

X/Y/Z AXES:
X & Y AXES RAPID TRAVERSE RATE --------- 788 IPM
Z-AXIS RAPID TRAVERSE RATE ------------- 709 IPM
SLIDE WAY TYPE ------------------------- HARDENED & GROUND
BOX WAY
X/Y/Z AXES FEED RATE ------------------- 1 - 393 IPM
X/Y/Z AXES SERVO MOTOR ----------------- AC 4 HP
X/Y/Z AXES BALL SCREW DIA./PITCH ------- 1.57 in /PITCH 10
X/Y/Z AXES THRUST (CONT.) -------------- 1,694 LBS.

AUTOMATIC TOOL CHANGER:
ATC TYPE ------------------------------- SWING ARM TYPE 30
TOOLS
TOOL CHANGE TIME T-T/C-C --------------- 3 SEC./7 SEC.
MAX. TOOL WEIGHT ----------------------- 17.6 LBS.
MAX. TOOL LENGTH ----------------------- 9.8 in
MAX. TOOL DIAMETER/ADJ. POCKETS EMPTY -- 3.5 in /5.9 in

GENERAL:
POSITION ACCURACY ---------------------- 0.0002 in
REPEATABILITY -------------------------- 0.0001 in
STANDARD CNC CONTROL ------------------- FANUC Oi-MC
VOLTAGE -------------------------------- AC 200/220/3/60
POWER REQUIREMENT ---------------------- 25 kVA
AIR REQUIREMENTS ----------------------- 85 PSI
COOLANT PUMP --------------------------- 3/4 HP GRUNDFOS 55
PSI
MACHINE WEIGHT ------------------------- 14,300 LBS.
MACHINE DIMENSIONS (L X W X H) --------- 103 in X 87 in X 107 in FEATURES: - CAT 40 TAPER 20 HP (PEAK) 8,000 RPM SPINDLE W/30-TOOL
SWING-
ARM TYPE ATC
- ADVANCE AUTO LUBRICATION SYSTEM W/ COPPER PIPING
- AIR GUN & COOLANT GUN
- C3 CLASS BALL SCREWS WITH PRETENSION ON ALL AXES
- FANUC AC SERVO DRIVE MOTORS
- WARRANTY:
2 YEARS ON FANUC CONTROL
1 YEAR ON MACHINE OPTIONAL FEATURES: 10,000 RPM BELT DRIVEN SPINDLE ------------- LESS $3,000
300 PSI COOLANT THRU SPINDLE WITH
ADVANCED DUEL FILTER SYSTEM --------------- $6,500
4TH AXIS INTERFACE ------------------------- $1,500
4TH AXIS SERVO DRIVE ----------------------- $3,500
ATLM
(AUTOMATIC TOOL LENGTH MEASUREMENT SYSTEM)- $2,500
HEIDENHAIN GLASS SCALES (X, Y, Z) ---------- $8,000
UPGRADE TO FANUC 18i-MB CONTROL ------------ $2,000
AL-NANO DATA SERVER HPCC RISC
256 MB ATA MEMORY CARD (18i ONLY) --------- $6,000 DELIVERY: IMMEDIATE - IN STOCK