Features:
« All Components Readily Available from Your Local Suppliers
« Groove in Bed and Ram Clamps for American Style Tooling
« Typical 20-30 Year Lifetime
« Full Tonnage throughout Stroke
« Counterbalance for Punching
« Typical +, - .001” Repeatability
« Full Tonnage across Bed and Ram
« 5 Year Parts Warranty
« 5 Year Limited Onsite Labor Warranty
« Lifetime Telephone Support at No Charge
« (2) 24” Work Support Arms
« Power ram tilt
« Manifold centralized lube system
« Hand/Foot sequence w/footswitch
« T-slot across front edge of brake bed
OPTIONAL FEATURES:Safety Light Curtain with Footswitch Floating blank key-switch included, some programmability. Side barriers included to completely protect throat area of machine. 1 year warranty. $6,500.00 Other brands of light curtains available at special request Laser Guarding Systems Wraps lasers around punch to allow operator closer to pinch-point and still be O.S.H.A. approved. 1 year warranty. $15,800.00 (Laser Guard system NOT recommended for punching/bottoming applications or applications with many die changes) Compliance Options including UL Listing, CSA, ZED As standard all components are U.L. listed but the system as a whole is not U.L. compliant. For U.L. compliant achine $2,500.00 NOTE! This price does not include U.L. officer sign off at destination—that is the responsibility of the customer For other listings Price per quote
Additional Footswitch and Pedestal Control $2,100.00
For multiple operators
Low Speed Retract
Ram returns in slow press speed for handling of large work pieces. $600.00 Safety Guarding for rear of press brake $7,500.00 Up to 20’. Comes with swinging gates and interlocking system for shut down while open. Custom guarding systems available.
Operational Preference Controls
Auto Return of Ram
Normal operation of ram requires operator to release footswitch to allow ram to return to upper limit. This option makes the ram return automatically even if footswitch is still depressed. $700.00
Decompression System
REQUIRED FOR BOTTOMING APPLICATIONS—allows oil pressure to bleed off to reduce shock to hydraulic system. $900.00
Lubrication System
Automatic Lubrication System (air power required)
Automatically pumps EP-1 grease through lubrication system via a timed system. Also includes flow adjustable injectors. Includes auto-shutoff with warning light when reservoir is empty. $5,300.00 Extended Warranty Service This package includes: t A 7 year parts in lieu of standard 5 year parts warranty t A 1 year PLC and CNC warranty t A 5 year onsite limited labor warranty 100 ton through 400 ton press brake $5,200.00 500 ton through 1,000 ton press brake $7,800.00 Paint Color BLUE WITH WHITE TRIM is standard on all machines—Charcoal is available at no charge but must be requested. Special Paint Color (single color industrial enamel only) A sample is required $1,200.00 Support Arms and Accessories NOTE! All brakes come standard with (2) 24" basic work supports. T-slot support arms have precision t-slot bars added to set gravity stops. T-Slot Support Arms 24” T-Slot Support Arm $550.00 (ea.) 36” T-slot Support Arm $900.00 (ea.) 48” T-slot Support Arm $1,100.00(ea.) For imbedded scales in arms Add $200.00 Gravity Stop for t-slot support arm $400.00 (ea.) 5/8” T-slot across front edge of bed Allows left to right movement of t-slot support arms INCLUDED CNC Sheet Assist/ Follower Heavy duty sheet follower to raise up and down with work piece controlled through 640 control (optional). Handles up to 400 lbs. $42,900.00 Parking Option $3,900.00 Quick-Release Linear Work Support System Quick-change, quick-disconnect style support arms with heavy duty, smooth transition roller guides for easy arm movement. Multiple adjustment points on arms for super precision placement. (2) 24” Arm System $5,900.00 (2) 36” Arm System $7,100.00 Non-CNC Multiple Depth Ram Control Four Position In-Line Depth Stop Mechanical Ram Control Manual ram control that allows operator to pre-set up to 4 different ram depths/angles by adjusting mechanical limits on the side of the brake. The operator can choose from any of the 4 positions from a selector switch located on the 2 hand control pedestal out in front of machine. $2,500.00 Basic 2-3 Axis CNC control NOTE! The Automec 300 control is specifically for users who want the most basic X, Y and R programming available. Automec 300 Series Control with 24” of gauge travel « 300 programs « 11 digit part numbers « Ram depth mode + Bend Allowance « Teach mode « Ram Angle Mode « Tooling library « Gauge retract/delay « Auto ram reference « Onsite training for Automec control CNC300/G48HD 2 Axis (48” travel) AB500-12/14, AB600-12/14 $43,100.00 CNC300/G48TD 2 Axis (48” travel) AB400-16 up to AB600-20 $53,200.00 (Triple drive with 48” travel) R Axis Add $8,200.00 630 Control with Tooling Graphics 1-4 axis Available up to Y + X + R + CNC CROWNING « Easy to use but extremely versatile control with on-screen 2D Tooling graphics « 10" color touchscreen mounted on pendant « 2D graphical Offline software for desktop programming available optionally « Available with X/ Y/ R and CNC Crowning axis programmability (crowning optional) « Thousands of hard drive job storage plus unlimited job storage via USB port + RS232 port + Ethernet « Extensive tooling library « Readily accepts most tooling files « Programmable delay and retract at pinch point « Inch/mm conversion « 29” of X axis gauge travel (optional 39”) « 8” adjustable manual R or optional power R « Auto return of ram included « Low speed retract included « Dwell/decompression included « One day onsite training in contiguous U.S. 630 w/Y axis control only (no backgauge-Onsite training included) $13,400.00 630 X/Y axis 29” gauge travel for AB500-12/14—AB600-12/14 $29,500.00 630 X/Y axis 29” gauge travel for AB400-16-AB600-20 $36,600.00 630 X and Y axes w/29” travel AB700-16 –AB1000-20 $46,500.00 Programmable CNC Ram tilt Allows you to program the desired ram tilt within the programmable jobs of the CNC. $3,500.00 2D Off-line programming software $900.00 R Axis Add $6,000.00 39” of gauge travel in lieu of 24” $7,900.00 Programmable tonnage $700.00 Additional finger $1,500.00 Radan 3D DXF/DWG File Transfer Capability Contact for quote 640 2D Graphical Control 1-6 Axis Available up to Y + X + R + Z1-Z2 + CNC CROWNING « Remote support/service and diagnostics via ethernet « Windows 10 operating system « Fully 2D Graphical control w/touchscreen « 15” color screen on pendant « Crowning correction in degrees (crowning sold separately) « 2D identification of best bending sequences « 2D graphical Offline software for desktop programming « 2D collision detection « Unlimited job storage via USB & Ethernet « X, Y, R, Z1-Z2, X-Prime programmability « Readily accepts most tooling files « 30,000 hard drive programs « Programmable delay & retract at pinch point « Direct connection of optional Mitutoyo protractor and Anglecheck devices to allow process angle measurement « Inch/mm conversion « Auto return of ram included « Low speed retract included « Dwell/decompression included « 2 Days Onsite training at customer's facility 640 X/Y axis w/29” gauge travel for AB500-12/14-AB600-12/14 $44,500.00 640 X/Y axis w/29” gauge travel for AB400-16-AB600-20 $46,500.00 640 X/Y axis w/29” gauge travel for AB700-16 –AB1000-20 $56,100.00 Programmable CNC Ram tilt Allows you to program the desired ram tilt within the programmable jobs of the CNC. $3,500.00 R Axis Add $6,000.00 39” of gauge travel in lieu of 29” $7,900.00 Programmable tonnage $700.00 2D graphical off-line software INCLUDED Additional finger $1,500.00 Radan 3D DXF/DWG File Transfer Capability Contact for quote Z1-Z2 Axis $12,900.00 (must have R axis) 660PC 3D CNC Control quote available upon request Tooling NOTE! NO DIES OR DIE HOLDERS ARE INCLUDED AS STANDARD—ALL DIES MUST BE ORDERED OPTIONALLY Dies quoted below are subject to 1 year die manufacturer’s warranty.
FLAME HARDENING IS OPTIONAL—CONTACT FOR QUOTE
Four Way Die Sets
#225 Tooling package for 18 gauge up to 3/16” pl. 7.5” stack height for die penetration (1) 2” net height die holder (1) 3.75” long x 1 1/8” wide, 85 degree punch with 3/64” radius (1) 2.25” square die block with 1/2”, 3/4”, 1”, and 1 1/2” v die openings at 85 degrees. 12’ in length $8,200.00 14’ in length $9,200.00 16’ in length $9,800.00 20’ in length $11,600.00 #325 Tooling package for 12 gauge up to ¼” plate 9” stack height for die penetration (1) 2” net height die holder (1) 3 3/4” long x 1 1/2” wide. 85 degree punch with 3/64” radius (1) 3 1/4” square die block with 3/4”, 1”, 1 1/2” and 2” v die openings at 85 degrees. 12’ in length $10,400.00 14’ in length $11,000.00 16’ in length $11,700.00 20’ in length $13,400.00 #475 Tooling package for 10 gauge up to 3/8” plate 10.5” stack height for die penetration (1) 2 1/2” net height die holder (1) 3 1/4” long x 2” wide, 85 degree punch with 1/8” radius (1) 4 3/4” square die block with 1”, 1 1/2”, 2 1/2” and 3” wide v die openings at 85 degrees. 12’ in length $13,500.00 14’ in length $14,300.00 16’ in length $15,800.00 20’ in length $20,400.00 #575 Tooling package for 10 gauge up to ½” plate 11”-12” stack height for die penetration (1) 2 1/2”net height die holder (1) 3 3/4” long x 1 1/2” wide, 85 degree punch with 1/8” radius (1) 2 3/4 long x 2 1/2” wide, 85 degree punch with 1/4” radius (1) 5.75” square die block with 1”, 2”, 3” and 5” v die openings at 85 degrees. 12’ in length $18,700.00 14’ in length $20,200.00 16’ in length $23,200.00 20’ in length $27,800.00 Crowning and Clamping Systems NOTE: Crowning is rarely needed for the AB due to the full tonnage capability the entire length of the bed but certain applications can benefit from a crowning unit. Contact the factory for more information. Manual and CNC crowning units used for fine tuning forming applications. When using with 4 way die sets add $800.00 for clamps to hold four way die blocks from 2.25” up to 4.25”. Larger four way die sets will require E-wide or larger crowning unit.
CROWNING
CROWNING FOR DIES UP TO 3.5” WIDE
Manual CNC Autocrown CNC Autocrown w/hyd. bed clamping
12’ $20,200.00 $24,000.00 $31,500.00
14’ $22,400.00 $26,000.00 $33,700.00
16' $25,400.00 $29,400.00 $40,500.00
20' $30,000.00 $34,800.00 $45,700.00
CROWNING FOR DIES UP TO 6” WIDE
Manual CNC Autocrown CNC Autocrown w/hyd. bed clamping
12’ $27,400.00 $31,200.00 $41,400.00
14’ $30,700.00 $34,400.00 $46,600.00
16' $35,300.00 $39,100.00 $54,300.00
20' $44,400.00 $47,800.00 $63,400.00
For crowning for V die openings larger than 6" contact factory
New Standard Premium, heavy duty hardened crowning systems, also available
RAM CLAMPING SYSTEMS
Tooling for Wila quick-change ram clamping systems quoted require: American Style Tooling + Safety Tangs with all punches
Wila Hydraulic Quick-Change, Power Ram Clamping Systems
American New Standard Pro
12’ $21,500.00 $22,000.00
14’ $23,300.00 $23,600.00
16’ $26,900.00 $27,600.00
20’ $31,000.00 $31,700.00
Removable and Non-Removable Bed and Ram Width Extensions
Machining required for Removable Flanges for up to 12’ machines
($1,600.00 each for bed or ram) $3,200.00
Removable 5”x 5” Angle flanges-- MUST INCLUDE ABOVE MACHINING
10” total additional width x 10’ long between end housings only.
For flanges longer than 10’ contact factory
($6,100.00 each for bed or ram) $12,200.00
Non-Removable Permanent Bed and Ram Flanges
Price below for 12’ overall and shorter brakes (contact factory for longer brakes)
11 ½” wide x 10’ Bed and Ram Flanges $6,400.00
(Between Housings only)
14” wide x 10’ Bed and Ram Flanges
(Between Housings only) $7,400.00
18” wide x 10’ Bed and Ram Flanges $10,600.00 (Between Housings only)
Other size Non-removable flanges are available upon request
High Speed Systems
Horsepower will increase with Hi-Speed Systems
Tonnage Standard System Hi-Speed System Price
App Press Ret App Press Ret
100/150 200 24 260 $7,900.00
200 107 20 139 183 20 236 $7,100.00
250 102 16 132 150 16 195 $7,100.00
325 90 18 116 159 18 127 $7.100.00
400 110 17 106 173 17 130 $7,600.00
For other High Speed Systems Contact Factory
Extra Open Height, Extra Throat Depth, Extra Stroke
Tonnage 12” Horn 2” Extra 4” Extra 2” Extra 2” Ex. Open Ht.
Ext. B & R Throat Throat Stroke (per every 2”)
100 $3,900.00 $3,500.00 $4,500.00 **$5,900.00 $700.00
150 $4,100.00 $3,800.00 $4,800.00 **$5,900.00 $800.00
200 $4,500.00 $3,900.00 $4,900.00 $6,500.00 $900.00
250 $4,700.00 $4,200.00 $5,200.00 $6,500.00 $900.00
325 $5,000.00 $4,800.00 $7,000.00 $7,000.00 $1,100.00
400 $5,300.00 $5,400.00 $7,400.00 $7,000.00 $1,200.00
500 $6,200.00 $6,300.00 $9,200.00 $7,000.00 $1,500.00
600 $7,300.00 $7,200.00 $10,300.00 $7,500.00 $1,700.00
700 $8,700.00 $8,700.00 $11,700.00 $9,500.00 $2,100.00
1,000 $10,000.00 $10,600.00 $13,700.00 $12,500.00 $2,600.00
Horn extensions provide 24” of extra bed and ram length. Longer extensions are available upon special request. Tonnage is limited on horns past the end frames to 10% of overall machine tonnage.
Consult factory for special changes not listed above. All frame changing options will be applied to new order machines only.
** NOTE: Longer Stroke NOT available on 6’, 8’ or 10’ brakes
NOTE: When ordering more than 6” of extra open height or throat depth on any tonnage consult factory for price.
NOTE: When ordering extra stroke, you do not automatically get extra open height. When ordering extra open height, you do not automatically get extra stroke. Both extra open height and extra stroke are separate options.
Start-Up / Training / Maintenance Service
NOTE! Onsite factory training/start-up is not included or required with purchase of a new press brake. Due to the simplicity of our machinery formal training is rarely required. All CNC Systems already include onsite training in quoted price.
Prior to arrival of our technician, the machine must be fully rigged in place, level, bolted down, oil in reservoir and hooked up electrically
If one day’s training/start-up for the machine is required add the following charge
Pacific/Mountain Time Zone: $3,800.00 (net)
Central Time Zone $2,800.00 (net)
Eastern Time Zone $3,400.00 (net)
Add $1,000.00 for each additional day required.
Deposit/Order Entry
A 25% NON-REFUNDABLE deposit is required at the point of order entry and the delivery schedule will not begin until the deposit is received at Standard Industrial. Customer is also required to pay for and accept delivery of machine(s) at previously agreed upon month of completion.
Voltage
If the machine is 50 H.P. or more, there will be a charge for 230, 208 or 200 volts. The standard voltage is 230-3-60 up to 40 h. p. but can be supplied up to 480-3-60 at no charge. 50 h. p. machines and above are standard with 480-3-60. Other voltages, phases and hertz are available but are subject to price increases.
NOTE: No tooling, gauging or oil is included as standard with the purchase of a new press brake. Tooling is available optionally. Customer will need to supply Mobil DTE24 or equivalent hydraulic oil (contact factory for amount).
