SPECIFICATIONS: *CAPACITY:
CENTER HEIGHT ------------------------------- 7.48 in
SWING OVER BED ------------------------------ 15.23 in
SWING OVER CROSS SLIDE ---------------------- 9.37 in
DISTANCE BETWEEN CENTERS -------------------- 50 in
*HEADSTOCK:
SPINDLE NOSE -------------------------------- D1-6
SPINDLE BORE(MAX. BAR DIA) ------------------ 2.20 in
SPINDLE SPEED ------------------------------- 16 STEPS
SPINDLE SPEED RANGE ------------------------- 25-2000 RPM
***RANGES:
25-33-45-60-80-108-140-190-265-350-470-625-840-1120-1500-
2000
*CARRIAGE:
LENGTH OF BED ------------------------------- 19 in
WIDTH OF BRIDGE ----------------------------- 9.84 in
CROSS SLIDE TRAVEL -------------------------- 9.25 in
TOP SLIDE TRAVEL ---------------------------- 4.72 in
*BED:
NUMBER OF V WAYS ---------------------------- 3 EACH in V in WAY
BED WIDTH ----------------------------------- 11 in
SWING IN GAP -------------------------------- 24 in
GAP BED WIDTH IN FACEPLATE ------------------ 7.68 in
*TAILSTOCK:
QUILL DIAMETER ------------------------------ 2.8 in
QUILL CENTER -------------------------------- M.T.4
QUILL TRAVEL -------------------------------- 6.14 in
*FEEDS & THREADS:
RANGE OF WHITWORTH THREADS & NO. ------------ 2-72 TPI (45)
RANGE OF METRIC THREADS & NO. --------------- .2-14 (39)
RANGE OF D.P. & NUMBER ---------------------- 8-44 (21)
RANGE OF M.P. & NUMBER ---------------------- .3-3.5 (18)
LONGITUDINAL FEED --------------------------- .0015-.04 in
CROSS FEEDS --------------------------------- .00078-.02 in
*MOTOR:
MAIN MOTOR ---------------------------------- 7.5 HP
COOLANT PUMP -------------------------------- .12 HP
*MEASUREMENT:
LENGTH PACKED ------------------------------- 102 in
WIDTH PACKED -------------------------------- 43 in
HEIGHT PACKED ------------------------------- 60 in
*WEIGHT:
GROSS WEIGHT -------------------------------- 3,747 LBS. FEATURES: MATRIX FORWARD/REVERSE DISC CLUTCH IN HEADSTOCK
MEEHANITE CASTINGS
16 SPEED GEARED HEADSTOCK
HARDENED AND REISHAUER GROUND GEARS
INDUCTION HARDENED BEDWAYS
LARGE 2-3/16 in SPINDLE BORE
CAMLOCK SPINDLE NOSE
CONSTANT HORSEPOWER
7.5 HP MAIN MOTOR
REMOVABLE GAP FOR INCREASED SWING
APRON CONTROL OF FEED AND SPEED FORWARD/REVERSE
FOOT BRAKE
TURCITE CARRIAGE WAYS
REAR MOUNTED ELECTRICALS
LOW VOLTAGE CONTROLS
HIGH PRESSURE LUBIRCATION TO HEADSTOCK, 1-SHOT SYSTEM TO
CARRIAGE, X SLIDE & C.F. SCREW.
AUTOMATIC FEED OVERLOAD in KICK OUT in
HIGH PRECISION 3 BEARING SPINDLE(TAPER ROLLER)
INCH/METRIC UNIVERSAL GEARBOS, TOTALLY ENCLOSED. EQUIPPED WITH: BACK PLATE
FOOT BRAKE
SQUARE 4 POSITION TOOL POST
FULL LENGTH REAR SPLASH GUARD
CHIP AND COOLANT TRAY
TWO MT #4 DEAD CENTERS
THREADING DIAL
MULTI-PLATE CLUTCH
SERVICE TOOLS & MANUAL
INCH/METRIC DIALS ON COMPOUND AND CORSS SLIDE (DIRECT
READING)
COMPLETE 3/60/220/440 VOLT ELECTRICS. SPECIFICATIONS SUBJECT TO VERIFICATION OPTIONAL FEATURES: ELECTRONIC VARIABLE SPEED HEADSTOCK, 7.5 HP MOTOR DRIVE,
JIC, NFPA-79, NEMA 12 ELECTRONICS (EVS) --------------
$8,100.00
ELECTRONIC VARIABLE SPEED HEADSTOCK, 7.5 HP,
220 VOLTS (EVS) --------------------------------- $4,900.00
ELECTRONIC VARIABLE SPEED HEADSTOCK
(EVS) 440 VOLTS --------------------------------- $ 405.00
MATRIX DISC CLUTCH ------------------------------ $INCLUDED
ALLEN BRADLEY ELECTRICS, 7.5 HP MOTOR ----------- $1,556.00
JIC - NFPA-79 / NEMA 12 SPECIAL ELECTRICS -------- $4,700.00
UL CERTIFICATION (REQUIRED FOR: EVS OPTION 20-310-15 OR
JIC 20-289-C-15) -------------------------------- $1,500.00
STEADY REST (6 inch CAPACITY) WITH ROLLERS ---------- $1,385.00
8 inch 3 JAW CHUCK D 1-6, DIRECT MOUNT (SEMI-STEEL) - $1,065.00
10 inch 3 JAW CHUCK D 1-6, DIRECT MOUNT(SEMI-STEEL) - $1,460.00
12 inch 3 JAW CHUCK D 1-6, DIRECT MOUNT(SEMI-STEEL) - $2,240.00
8 inch 3 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY) - $1,590.00
10 inch 3 JAW CHUCK D 1-6, DIRECT MOUNT(STEEL BODY) - $2,200.00
12 inch 3 JAW CHUCK D 1-6, DIRECT MOUNT(STEEL BODY) - $2,790.00
10 inch 4 JAW CHUCK D 1-6, DIRECT MOUNT(SEMI-STEEL) - $1,345.00
12 inch 4 JAW CHUCK D 1-6, DIRECT MOUNT(SEMI-STEEL) - $2,790.00
8 inch 4 JAW CHUCK D 1-6, DIRECT MOUNT (STEEL BODY) - $2,070.00
10 inch 4 JAW CHUCK D 1-6, DIRECT MOUNT(STEEL BODY) - $2,250.00
12 inch 4 JAW CHUCK D 1-6, DIRECT MOUNT(STEEL BODY) - $3,501.00
BACK PLATE OR DOG PLATE 8 in , D1-6 ---------------- $ 345.00
FACE PLATE 14 in FOR D1-6 SPINDLE NOSE ------------ $ 631.00
DRILL CHUCK 1/2 inch (KEY TYPE) WITH NO. 4 MORSE
TAPER SHANK ------------------------------------- $ 332.00
DRILL CHUCK 3/4 inch (KEY TYPE) WITH NO. 4 MORSE
TAPER SHANK ------------------------------------- $ 739.00
2-AXIS ACU-RITE T203 DIGITAL READ-OUT
(D.R.O.)(INSTALLED) ----------------------------- $3,233.00
2-AXIS ACU-RITE T303 DIGITAL READ-OUT (D.R.O.) WITH THREAD
ASSIST FOR 15X50 in (INSTALLED) (CUT METRICS THREADS &
DISENGAGE 1/2 NUT) ------------------------------ $2,858.00
2-AXIS FAGOR 40I DIGITAL READ-OUT (D.R.O.) WITH CONSTANT
SURFACE SPEED (C.S.S.) FOR EVS LATHES 15 X 50 in (INSTALLED)
(4 GEAR RANGE) ---------------------------------- $4,015.00
2-AXIS NEWALL DP700 DIGITAL READ-OUT
(D.R.O.)(INSTALLED) ----------------------------- $3,365.00
CUSTOM PAINT COLOR ------------------------------ $ 895.00
TAPER ATTACHMENT, TELESCOPIC TYPE, TRAVEL
6 inch ?? 10 DEGREES --------------------------------- $1,974.00
LIVE CENTER, MT #4 ------------------------------ $ 398.00
CARRIAGE STOP - 5 POSITION BED WITH MICROMETER -- $ 425.00
MICROMETER CARRIAGE STOP ------------------------ $POR
CHUCK GUARD WITH SAFETY LIMIT SWITCH ------------ $ 460.00
QUICK CHANGE TOOL HOLDER SET CXA #3 (5 PC. (1 TOOL POST & 4
HOLDERS) (CAPACITY 3/4 inch) ------------------------ $1,485.00
QUICK CHANGE TOOL HOLDER SET CXA #3 (7PC. (1 TOOL POST & 6
HOLDERS) (CAPACITY 3/4 inch) ------------------------ $1,991.00
5-C LEVER TYPE PRODUCTION COLLET CLOSER (UP TO 1 1/16 inch
CAPACITY), D1-6 --------------------------------- $2,106.00
HANDWHEEL TYPE COLLET CHUCK, 5-C, D1-6 (SPINDLE NOSE
MOUNTED) ---------------------------------------- $2,028.00
5-C COLLETS - 16 PIECES,1/8 in TO 1 1/16 in CAPACITY - $ 694.00
WOOD SKID WRAPPED IN SHRINK PLASTIC ------------- $POR
COMPLETELY ENCLOSED WOOD CRATE (TREATED WOOD), MACHINE
TREATED WITH ANTI-RUST COAT OVER ALL METAL SURFACES AND
WRAPPED IN THERMAL SEALED FOIL BAG. (NET) ------- $POR DELIVERY: SUBJECT TO STOCK