SPECIFICATIONS: CAPACITY - HAND FEED --------------- 1-1/4 in DIA.
PRODUCTION RATED, WITH OPTIONAL
POWER FEED, 1-1/2 HP MOTOR ------- 1/8 in IN CAST IRON,
7/8 in IN STEEL
DRILL TO CENTER OF CIRCLE ---------- 20 in DIA.
SPINDLE NOSE ----------------------- NO. 3MT, 1.74 in OD
SPINDLE TRAVEL --------------------- 6-1/2 in
COLUMN ----------------------------- GROUND STEEL, 4 in DIA.,
1/2 in THICK WALL
QUILL ------------------------------ GROUND STEEL, 2-1/2 in
DIA.
QUILL RETURN SPRING, CAPACITY ------ 40 LBS.

TABLE:
WORKING SURFACE -------------------- 22 in X 19-1/2 in
TABLE SLOTS ------------------------ TWO, 15-1/2 in LONG, FOR
1/2 in T-BOLT
TABLE TRAVEL, ONE SETTING ---------- 20 in
SPINDLE TO TABLE, MAXIMUM ---------- 33-1/8 in

BASE:
WORKING SURFACE, GROUND ------------ 15-1/2 in X 13 in
BASE T-SLOTS ----------------------- TWO, 13 in LONG FOR
1/2 in T-BOLT
SPINDLE TO TABLE, MAXIMUM ---------- 43-3/8 in
MOTOR - NEMA FRAME SIZES ----------- 182 AND 184
SHIPPING WEIGHTS, APPROXIMATE, WITH
MOTORS --------------------------- 630 LBS. EQUIPPED WITH: - VARIABLE COUNTERSHAFT DRIVE
- NO. 3 MT SPINDLE
- ELEVATING MECHANISM
- SWITCH
- BELT GUARD
- SPINDLE GUARD
- 2-SPEED, 3 PHASE, 220 VOLT
- LOW/HIGH INFINITELY VARIABLE SPEEDS:
150 - 2000 RPM
- MAGNETIC STARTER & TWO-SPEED DRU SPECIFICATIONS AND PRICING SUBJECT TO VERIFICATION OPTIONAL FEATURES: OPTIONS FOR 2-SPEED MOTOR:


NO. 2375MT MAGNETIC STARTER & REVERSING DRUM SWITCH: -- $
810.00
WITH REVERSE ON LOW SPEED. PROTECTS MOTOR
AGAINST OVERLOAD, LOW AND NO VOLTAGE.
MOTOR WILL NOT AUTOMATICALLY RESTART WHEN
POWER IS RESTORED. TRANSFORMER PROVIDES
110V AT START/STOP PUSH BUTTON SWITCH.
6 LB.

NO. 2215 GEAR DRIVEN POWER FEED 
POSITIVE GEAR DRIVE FOR MAXIMUM POWER AND
EFFICIENCY --- FEED IS ALWAYS IN DIRECT
RELATION TO DRILL SPEED.

NO. 2217 AIR-HYDRAULIC FEED 
FOR AUTOMATIC OR SEMI-AUTOMATIC PRODUCTION.
EASY TO SET UP. RAPID APPROACH AND RAPID
RETURN ARE CAM ACTUATED---TO SKIP FEED,
MERELY CHANGE SHAPE OF CAM. FEEDS ARE
INFINITELY VARIABLE, 1/2 in TO 60 in PER
MINUTE---HYDRAULICALLY CONTROLLED FOR
UNIFORMITY. DEPTH STOP IS MICROMETER
GRADUATED.

NO. 302 ELECTRIC FOOT CONTROL 
OPERATES DRILL FROM FOOT PEDAL

NO. 1618 FOOT CONTROL VALVE 
COMPLETE WITH ACCUMULATOR, HOSE, CONNECTOR.
FOR ONE AIR-HYDRAULIC FEED. 3 LBS.

DELIVERY: SUBJECT TO STOCK